If you're still using standard-flow toilets, faucets, and shower heads in your home, then you're most likely using a lot more water than you need to. However, with modern advances in water conservation technology, it's easier than ever to switch to more efficient models. Here are four reasons you should switch to low-flow plumbing fixtures throughout your home.
#1: Low-Flow Plumbing Fixtures Get the Job Done
In the past, low-flow plumbing fixtures were often less effective than their standard-flow counterparts. However, modern incarnations not only use significantly less water - they also don't compromise performance.
Low-flow toilets developed a reputation for weak flushes, but they no longer deserve a bad reputation. Most modern toilets incorporate dual flushing, which means you'll have a half-flush option for liquid waste and a full-flush option for solid waste. In addition, new versions offer a stronger water stream than earlier low-flows while still using up to 70 percent less water than standard fixtures.
#2: Low-Flow Plumbing Fixtures Save You Money
Converting your toilets, faucets, and showerheads to low-flow versions will drastically reduce your water usage, which will then lower your monthly water bill. When you have an outdoor sprinkler system, switching to high-efficiency sprinkler heads can also have a big impact on your water expenses.
Reduced water usage isn't the only way low-flow fixtures can save you money. Installing a low-flow showerhead will also reduce the workload of your hot water heater, and since water heaters use a lot of gas and electricity, this lower workload will result in lower energy bills.
#3 Low-Flow Plumbing Fixtures Are Better for the Earth
Around the world, water shortages are becoming a frequent news headline. With extreme drought seemingly a yearly event somewhere in the US, conserving water is more critical than ever.
While you should also practice other water conservation techniques, installing low-flow fixtures throughout your home is a great way to help do your part for the earth. Besides reducing water usage, these fixtures also help to reduce energy usage. Pumping and heating water requires energy - the less water used, the less energy expended.
In addition, by reducing the amount of wastewater we produce, we help reduce the amount of energy used for municipal wastewater treatment. If you want to reduce your carbon footprint, then installing low-flow fixtures is an easy way to start.
#4: Low-Flow Plumbing Fixtures Are Easy to Install
You don't need to spend a lot on a plumber to reap the benefits of low-flow fixtures. Many of these watersaving modifications can be implemented on your own, with little effort.
For example, replacing a standard showerhead with a low-flow model is well within the reach of the average DIY-er. As long as you have, and know how to use, some basic household tools, you shouldn't run into any problems.
When it comes to faucets, an easy way to reduce their water usage is to install an aerator. This device is very simple to install and reduces water usage by adding more air to the water stream.
With the variety of low-flow plumbing fixtures available to the consumer, there's no longer a good reason to continue using fixtures that wastewater. If you think it's time for an upgrade, then shop around for new fixtures today.
When you're ready to switch to low-flow fixtures, contact a reliable plumber for installation.
Whether you need repair or installation, our qualified team of technicians at Ritz Plumbing are standing by to help you with your plumbing needs. Contact us today for a free estimate and to schedule a service appointment. We're available 24 hours a day.